Synergy Marine

3D printing services

Custom parts, functional prototypes and small production runs, designed and made in our Waldringfield workshop.

We make bespoke components for every class of boat we build. When we can’t source the part we need, we design and manufacture it in-house. We refine each part so it works well, fits neatly and looks right on the finished boat.

We’ve been 3D printing since 2018. Our Bambu Lab X1 Carbon (X1C) and Prusa printers support both our own boat builds and customer projects.

Workshop Printed

Why use FDM printing?

Fused deposition modelling (FDM) builds parts layer by layer from thermoplastic filament. It suits jobs where you need to test an idea quickly, make a shape that’s awkward to machine, or produce a few parts without commissioning dedicated tooling.

Test and refine

Print a first version to check fit, clearances and handling. Adjust the CAD model and print again before committing to the final design.

Make one or a small batch

Produce a replacement fitting, a handful of custom parts, or workshop aids such as jigs and assembly fixtures. An approved model can be printed again when more are needed.

Design for the job

Build features such as recessed fasteners or cable guides into the part. We choose filament and print orientation to suit the expected loads, heat, sunlight and water exposure.

CAD design and reverse engineering

We model in Rhino 3D. We can create a new product from your requirements or reverse engineer an existing component from a sample and measurements. Tell us how it fits, what it connects to and what you’d like to improve. We can use a prototype to check the design before making the finished parts.

What we make for our boats

Our printed parts include mast bearings, spinnaker pole fittings and, on the International Europe, the mast gate and mast step. Designing around the boat lets us refine the fit, shape and finish together.

Workshop Cad

FROM THE WORKSHOP

Printed moulds for forged carbon fibre

One of our favourite uses for 3D printing is making moulds for strong, compact carbon fibre components. For the Merlin Rocket, we print the moulds and use them to compression-mould the mast step and mast foot in-house.

Chopped carbon fibre and resin are pressed into the mould to form the finished part. Designing the tooling in Rhino lets us tailor the component to the boat’s geometry and refine the mould as the fit-out develops.

Request a quote

Send an STL or STEP file, a sketch with dimensions, or photos of the part you’d like us to reproduce. Include the quantity, how the part will be used, any critical dimensions and when you need it.

The X1C’s nominal build volume is 256 × 256 × 256 mm. We’ll confirm what fits based on part shape, orientation and support requirements.

Enquire about 3D printing