3D printing, CAD design & custom parts
Custom parts, functional prototypes and small production runs, designed and made in our Waldringfield workshop.

A fitting that needs to fit better. A prototype to prove an idea. A small batch of parts you cannot buy off the shelf. At Synergy Marine, we combine CAD design and 3D printing to turn those requirements into practical components.
We have been 3D printing since 2018, producing parts and components for own products and customer projects. When we cannot source the part we need, we design and manufacture it in-house, refining the fit, shape and finish together.

From an idea to a working part
We model in Rhino 3D. Bring us your requirements, a sketch, an existing component or a digital model, and we can help develop the design.
For reverse engineering, tell us how the component fits, what it connects to and what you want to improve. Measurements and a sample help us establish the geometry; a printed prototype lets us check the design before making the finished parts.
Developed around the boat
Our own boat builds give us a practical reason to keep developing better parts. We make mast bearings, spinnaker pole fittings and custom mast bearings for International Europe and OK Dinghy’s.
Designing the component around the boat lets us refine the fit and finish as part of the complete installation. The same approach applies to customer projects: start with the job the part needs to do, then work through the details.
Designed for the job
Fused deposition modelling (FDM) builds parts layer by layer from thermoplastic filament. It is useful when you need to test a design, make a shape that is awkward to machine or produce a few components without commissioning dedicated tooling.
Test and refine
Check fit, clearances and handling with a first print. Refine the CAD model and print again before committing to the finished design.
One part or a small batch
Make a replacement fitting, a handful of custom components, or workshop aids such as jigs and assembly fixtures. An approved model can be printed again when more are needed.
A part that fits its purpose
Build in features such as recessed fasteners or cable guides. We choose filament and print orientation to suit the intended loads, heat, sunlight and water exposure.
Printed tooling. Carbon fibre components.
A printed part can also be the tool that makes the finished component. We 3D print moulds and use them to compression-mould components in-house.
Chopped carbon fibre and resin are pressed into the mould to form the finished part. Designing the tooling in Rhino lets us tailor the component to precise geometry and refine the mould as required by the project.
Tell us what you need
Send an STL or STEP file, a sketch with dimensions, or photographs of the component you would like us to reproduce. Include the quantity, how it will be used, any critical dimensions and when you need it.
The X1 Carbon has a nominal build volume of 256 × 256 × 256 mm. We will confirm what fits based on the part shape, orientation and support requirements.
